For hydrostatic testing when pipe samples are immersed in water with a precisely controlled temperature. It is also suitable for conditioning samples by immersion in a temperature-controlled environment.

The hydrostatic bath is designed for testing polymer products by determining resistance at constant internal pressure in an aqueous medium at a constant temperature.

Standards: GOST 24157, ISO 1167, ISO 10508, ASTM D1598, ASTM D1599

Features:

1. The material of the inner part is made of stainless steel and equipped with a stainless steel pump.

2. High-precision temperature control system: the application of a two-way independent heating and circulation system with high heat transfer efficiency, pump flow rate of at least 4 m³/h, ensures the uniformity of the temperature field.

3. With excellent thermal insulation properties, even at water temperatures up to 95°C, the outer casing remains at room temperature. This helps increase safety and save more than 70% of energy consumption.

4. Equipped with a steam collection device that solves the problem of steam overflow from the water tank.

5. The structural fastening frame provides excellent load-bearing capacity and anti-deformation ability.

6. The lid is open: pneumatic control, the degree of opening can be adjusted according to customer requirements.

7. Automatic water level control; if the water level is below the preset value, it will be automatically restored by supplying water, so that the set temperature does not fluctuate too much; this also eliminates the heater operating without water, significantly prolonging the service life and safety of the heater.

8. High cooling efficiency.

Technical parameters:

1. Water temperature control range: 20°C～95°C.

2. Accuracy of water temperature control: ±0.1°C.

3. Uniformity of the bath temperature : ±1°C.

4. Fluctuation in water level during intelligent refilling: <0.1°C.

5. Material: Type 304 stainless steel.

6. Type of lid opening: pneumatic drive.

7. Supplement type water supply: automatically.