A pneumatic punching press is utilized for cutting samples made from rubber, plastic, film, leather, and other special materials using a die-cut method. Here are the technical parameters for the SL-P25 model:

Technical Parameters:

• Model: SL-P25
• Max. Load: 28 kN (based on a 0.7 MPa air source)
• Stroke: 100 mm
• Workbench Size: 300 mm × 200 mm
• Press Head Size: F150 mm
• Nylon Board Size: 150 mm × 200 mm
• Air Source: 0.4~0.7 MPa
• Parallelism Adjustment Device: ±2 mm Deviation from flatness of the surface is permissible
• Weight: 110 kg
• Dimensions: Height 757 mm x Depth 431 mm x Width 363 mm