Your current location:Plastic Pipe Testing Equipment

Pipe opacity tester

Overview

This instrument is specialized in accurately measuring the opacity of plastic pipes and fittings, with the results presented intuitively as a percentage. It replaces the traditional testing methods for pipe opacity. Controlled by an industrial touch screen, it features functions such as calibration, data analysis and calculation, and the ability to store test results on a USB drive. This device is designed to measure the opacity of water pipes or fittings exposed to visible light, effectively preventing the growth of algae inside the pipes.

Model: SL - TG20

Pipe opacity tester(图1) 

Standards

ISO 7686 Plastics pipes and fittings — Determination of opacity

Instrument Features

1. It adopts a high - precision standard A parallel light source, with the light wave strictly controlled within the range of 540 - 560 nm.

2. The light flux acquisition system uses an industrial - grade high - precision light collector with extremely strong anti - interference ability and a 24 - bit analog - to - digital conversion circuit. The measurement results are stable and reliable, with a resolution of 0.01%.

3. The specimen holder provides three positioning points for each specimen and has a voice prompt function.

4. Controlled and displayed by a color liquid crystal touch screen, it offers convenient operation and intuitive display.

5. Test data can be stored on a USB drive for easy test record - keeping.

6. The specimen chamber can be manually opened and closed, which is convenient and fast, reducing the equipment failure rate.

Pipe opacity tester(图2)

Technical Parameters

1. Pipe Diameter Range: Φ16 - Φ200 mm, thickness < 20mm

2. Specimen Length: 80mm

3. Grating: 16, 20, 25, 32, 40

4. Specimen Holder: 16, 20, 25, 32, 40

5. Measurement Points: Three points

6. Light Wavelength: 540nm - 560nm

7. Resolution: 0.01%

8. Accuracy: < 0.05%

9. Power Supply Voltage: 220VAC, 50Hz, 0.10kW (single - phase three - wire system)

10. Main Unit Dimensions: 530×245×510mm

11. Main Unit Weight: ≈20 kg

12. Note: For specimens with an outer diameter greater than 40mm, a 40 - sized specimen holder and grating should be used.



Email
starlink@starlink-test.com
Tel
WhatsApp: + 7(912)007-73-43 / 18511447585
Address
102200, Changping District, Beijing, China